Garage door installation project can be accomplished by ordinary homeowners that have basic mechanical knowledge and good tools management skills. It is true that you can save as much as 40 percent of the cost of the overall garage door installation project by doing so. But many garage door companies will not encourage the DIY garage door installation project. In many cases, they will not cover the warranty if you could mess with the system. In general, garage door installation is a complicated job that proper skills, tools, and experience from the right experts. Visit the website https://jacksonvilleflgaragedoors.com/garage-door-installation/ to get more information about installing a garage door. You can get all the information that you may need using the internet or by visiting the local hardware store near you. It is extremely important that you measure the opening size including the overhead space above the garage door correctly. You will need almost 12 inches of space to install the torsion springs and opener properly. In case, you have short space then there are several low headroom kits for openers available in the market that will be important for installing a new garage door. The main point of risk involved in the garage door installation comes from garage door torsion springs that are used to aid the garage door in the lifting and lowering process. These springs are located on the headwall right above the garage door opening inside the garage. When these springs are installed correctly, they make the garage door weightless during the opening and closing process. When the garage door is in its closing position, the torsion springs are tightly wound by hold extreme pressure, when the garage door opens they will unwind to support the garage door to lift. Old and weak springs do break by creating a loud sound that can be frightening. The great amount of stored energy in the springs can cause serious injuries or death. However, if you follow the installation instructions mentioned in the manual, there is no chance of potential accidents working with the power tools. If you are not familiar with the structure of the garage doors and not comfortable with the handy tools, you just need to hire a professional garage door installation company to install the garage doors and their springs for you. The garage door installation project needs a degree of patience to accomplish. Hanging the tracks correctly may need doing correction several times. Don’t forget that the garage door may weigh more than 500 pounds and will be supported by hangers and mounting brackets. Some required tools for the garage door installation project are: HammerCordless reversible drillLadder pliersSeveral feet of ½ inch punched angle steelPliersLevelSaw horses Garage door installation is really not a hard project to accomplish if you are good at fixing think around your house. Well if you are not sure about the work then I strongly advised you to hire a professional garage door installer to do the job.